BlueScope Library

Find the information you need from BlueScope. The BlueScope Library provides a large range of resources including Product Datasheets, Technical Bulletins, Brochures, Environmental Product Declarations and Safety Datasheets.

The information and advice contained in these files is of a general nature only and has not been prepared with your specific needs in mind. BlueScope Steel Limited makes no warranty as to the accuracy, completeness, reliability, or currency of these files and accepts no liability for errors in, or omissions from, these files or your reliance on these files. Please refer to the website Terms of Use for full conditions.

Filter BlueScope Library

Literature Type
Product
File TypeTitle
ZINC HI-TEN® steel G500 and G500S Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 500MPa. Suitable for roll-forming to a 4t minimum internal diameter. ZINC HI-TEN® G500S steel is skin passed to improve surface quality.

ZINC HI-TEN® steel G550 and G550S Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 550MPa. Suitable for roll-forming to a 4t minimum internal diameter. ZINC HI-TEN® G550S steel is skin passed to improve surface quality.

ZINCALUME® steel G250 with Activate® technology Datasheet

Hot- dipped aluminium / zinc / magnesium alloy coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 250MPa with good ductility.

ZINCALUME® steel G2N with Activate® technology Datasheet

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface. It is suitable for moderate drawing and pressing, guaranteed non-ageing and free from stretcher strain.

ZINCALUME® steel G300 with Activate® technology Datasheet

Hot-dipped aluminium / zinc / magnesium alloy coated structural steel with a regular spangle surface, a guaranteed minimum yield strength of 300MPa with good ductility.

ZINCALUME® steel G450 with Activate® technology Datasheet

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 450MPa with limited ductility. Suitable for roll forming to a minimum internal diameter of 4t.

ZINCALUME® steel G500 with Activate® technology Datasheet

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 500MPa with limited ductility.

ZINCALUME® steel G550 with Activate® technology Datasheet

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface, a guaranteed minimum yield strength of 550MPa with limited ductility.

ZINCANNEAL® steel G2S Datasheet

Hot-dipped zinc/iron alloy-coated commercial forming steel with a skin-passed smooth matte surface suitable for direct-on painting. Some powdering of the coating may occur with severe deformation.

ZINCFORM® steel G250 and G250S Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 250MPa, with good ductility. Suitable for severe rollforming. ZINCFORM® G250S steel is skin passed to improve surface quality. This skin passed product is only available up to 2mm thick.

ZINCFORM® steel G300 and G300S Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 300MPa, with good ductility. Suitable for rollforming to an internal diameter of 1t. ZINCFORM® steel G300S is skin passed to improve surface quality. This skin passed product is only available up to 1.6mm thick.

ZINCFORM® steel G350 Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 350MPa, with good ductility. Suitable for roll forming to a minimum internal diameter of 2t.

ZINCFORM® steel G400 Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 400MPa, with good ductility. Suitable for roll forming to a minimum internal diameter of 2t.

ZINCSEAL® steel G2S Datasheet

Low coating mass zinc/iron alloy-coated commercial forming steel suitable for bending and moderate forming. It has a skin-passed smooth surface finish providing a surface suitable for a high quality paint finish.

Files selected for downloading