BlueScope Library

Find the information you need from BlueScope. The BlueScope Library provides a large range of resources including Product Datasheets, Technical Bulletins, Brochures, Environmental Product Declarations and Safety Datasheets.

The information and advice contained in these files is of a general nature only and has not been prepared with your specific needs in mind. BlueScope Steel Limited makes no warranty as to the accuracy, completeness, reliability, or currency of these files and accepts no liability for errors in, or omissions from, these files or your reliance on these files. Please refer to the website Terms of Use for full conditions.

Filter BlueScope Library

Literature Type
Product
File TypeTitle
REDCOR® weathering steel (coilplate) AS/NZS 1594 - HW350A Datasheet

High phosphorous structural weathering steel with a minimum yield strength of 340MPa.

REDCOR® weathering steel AS/NZS 1595 - CW300A Datasheet

High phosphorous structural weathering steel with a minimum yield strength of 300MPa.

REDCOR® weathering steel AS/NZS 3678 - WR350A, WR350L0A Datasheet

High phosphorous structural weathering steel with nominal yield strength of 340MPa for thicknesses from 8 to 12mm with an option for guaranteed impact performance at 0°C.

REDCOR® weathering steel AS/NZS 3678 - WR350B, WR350L0B, WR350L20B Datasheet

Low phosphorous structural weathering steel with nominal yield strength of 340MPa for thicknesses from 10 to 80mm with options for guaranteed impact performance at 0 and -20°C.

Sign Writing Panel prepainted steel (SWP) Datasheet

Sign Writing Panel prepainted steel (SWP) has been specifically designed by BlueScope to provide a durable, mar-resistant, high-gloss product with superior overpaintability for the signwriting industry.

SUPERDURA® Stainless steel (XSS) Datasheet

SUPERDURA® Stainless steel (XSS) by BlueScope, provides BlueScope's ultimate prepainted product in corrosion resistance and weatherability in exterior applications, typically within 100m of the severe environment.

Superior Gloss Articles prepainted steel (SGA) Datasheet

Superior Gloss Articles prepainted steel (SGA) has been designed by BlueScope to provide a durable, mar-resistant, high quality surface for the non-critical interior appliance products.

TRU-SPEC® coil plate steel AS/NZS 1594 – HA1 Datasheet

Hot-rolled commercial forming product suitable for simple forming, welding and bending operations.

TRU-SPEC® coil plate steel AS/NZS 1594 – HA200 Datasheet

Hot-rolled structural product with minimum yield strength of 200MPa, good ductility and good weldability.

TRU-SPEC® coil plate steel AS/NZS 1594 – HA250 Datasheet

Hot-rolled structural product with minimum yield strength of 250MPa, good ductility and good weldability.

TRU-SPEC® coil plate steel AS/NZS 1594 – HA300 Datasheet

Hot-rolled structural steel with a minimum yield strength of 300 MPa, good ductility and good weldability.

TRU-SPEC® coil plate steel AS/NZS 1594 – HA350 Datasheet

Hot-rolled structural product with minimum yield strength of 350MPa, good ductility and good weldability.

TRU-SPEC® coil plate steel AS/NZS 1594 – HK1042 Datasheet

Hot-rolled carbon steel with a guaranteed chemical composition.

TRU-SPEC® Floorplate AS/NZS 1594 – HA250 Datasheet

Hot-rolled structural floorplate (raised pattern on one surface) with minimum yield strength of 250 Mpa and good weldability.

TRUECORE® steel G450 Datasheet

Hot-dipped aluminium/zinc/magnesium alloy-coated structural steel with a guaranteed minimum yield strength of 450MPa, manufactured using a blue tinted resin. It is designed for the residential house and commercial framing markets

TRUECORE® steel G500 Datasheet

Hot-dipped aluminium/zinc/magnesium alloy-coated structural steel with a guaranteed minimum yield strength of 500MPa, manufactured using a blue tinted resin. It is designed for the residential house and commercial framing markets.

TRUECORE® steel G550 Datasheet

Hot-dipped aluminium/zinc/magnesium alloy-coated structural steel with a guaranteed minimum yield strength of 550MPa, manufactured using a blue tinted resin. It is designed for the residential house and commercial framing markets

TUBEFORM® steel G300 Datasheet

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 300MPa, with good ductility. Suitable for roll-forming to an internal diameter of 1t.

Welded Beams and Columns AS/NZS 3679.2 – 300 (L15) Datasheet

Welded Beams and Columns are manufactured in accordance with AS/NZS 3679.2:2016, from plate manufactured to AS/NZS 3678:2016 with a nominal yield strength of 300MPa. 300L15 has a guaranteed impact performance at -15°C.

Welded Beams and Columns AS/NZS 3679.2 – 400 (L15) Datasheet

Welded Beams and Columns are manufactured in accordance with AS/NZS 3679.2:2016, from plate manufactured to AS/NZS 3678:2016 with a nominal yield strength of 400MPa. 400L15 has a guaranteed impact performance at -15°C.

XLERPLATE® steel AS 1548 – PT430T (L0) Datasheet

A fully killed, fine grained, carbon-manganese steel for boiler and pressure vessel applications, with a guaranteed minimum tensile strength of 430MPa. Produced by ThermoMechanical controlled rolling.

XLERPLATE® steel AS 1548 – PT460N (L20, L40) Datasheet

A fully killed, fine grained, carbon-manganese steel for boiler and pressure vessel applications, with a guaranteed minimum tensile strength of 460MPa. Produced by hot rolling and normalising

XLERPLATE® steel AS 1548 – PT460NR (L0, L20) Datasheet

A fully killed, fine grained, carbon-manganese steel for boiler and pressure vessel applications, with a guaranteed minimum tensile strength of 460MPa. Produced by normalised rolling.

XLERPLATE® steel AS 1548 – PT460NRA (L0, L20) Datasheet

A fully killed, fine grained, carbon-manganese steel for boiler and pressure vessel applications, with a guaranteed minimum tensile strength of 460MPa. Produced by normalised rolling. Tested in the normalised and stress relieved condition.

XLERPLATE® steel AS 1548 – PT460T (L0, L20, L40, L50) Datasheet

A fully killed, fine grained, carbon-manganese steel for boiler and pressure vessel applications, with a guaranteed minimum tensile strength of 460MPa. Produced by thermo-mechanical controlled rolling.

Files selected for downloading