BlueScope Library

Hot-rolled extra formable structural steel suitable for improved forming and bending with a guaranteed minimum yield strength of 480 MPa.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 450MPa. Suitable for roll-forming to a 4t minimum internal diameter. ZINC HI-TEN® G450S steel is skin passed to improve surface quality. This skin passed product is only available up to 2mm thick.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 500MPa. Suitable for roll-forming to a 4t minimum internal diameter. ZINC HI-TEN® G500S steel is skin passed to improve surface quality.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 550MPa. Suitable for roll-forming to a 4t minimum internal diameter. ZINC HI-TEN® G550S steel is skin passed to improve surface quality.

Hot- dipped aluminium / zinc / magnesium alloy coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 250MPa with good ductility.

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface. It is suitable for moderate drawing and pressing, guaranteed non-ageing and free from stretcher strain.

Hot-dipped aluminium / zinc / magnesium alloy coated structural steel with a regular spangle surface, a guaranteed minimum yield strength of 300MPa with good ductility.

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 450MPa with limited ductility. Suitable for roll forming to a minimum internal diameter of 4t.

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface and a guaranteed minimum yield strength of 500MPa with limited ductility.

Hot-dipped aluminium / zinc / magnesium alloy-coated structural steel with a regular spangle surface, a guaranteed minimum yield strength of 550MPa with limited ductility.

Hot-dipped zinc/iron alloy-coated commercial forming steel with a skin-passed smooth matte surface suitable for direct-on painting. Some powdering of the coating may occur with severe deformation.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 250MPa, with good ductility. Suitable for severe rollforming. ZINCFORM® G250S steel is skin passed to improve surface quality. This skin passed product is only available up to 2mm thick.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 300MPa, with good ductility. Suitable for rollforming to an internal diameter of 1t. ZINCFORM® steel G300S is skin passed to improve surface quality. This skin passed product is only available up to 1.6mm thick.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 350MPa, with good ductility. Suitable for roll forming to a minimum internal diameter of 2t.

Hot-dipped zinc-coated structural steel with a spangled surface and guaranteed minimum yield strength of 400MPa, with good ductility. Suitable for roll forming to a minimum internal diameter of 2t.

Low coating mass zinc/iron alloy-coated commercial forming steel suitable for bending and moderate forming. It has a skin-passed smooth surface finish providing a surface suitable for a high quality paint finish.