Visit colorbond.com

Are you a Homeowner wanting inspirational ideas to create your dream home?

 
SZ400 Lysaght SupaZeds® profile
Lysaght SA, QLD, NT

SZ400 LYSAGHT SupaZeds® profile

The LYSAGHT SUPAPURLIN® profiles consist of a LYSAGHT SupaZed® and SupaCee® profile. These SUPAPURLIN are an advancement of the traditional Zed and Cee profiles. The benefits of the traditional Zed and Cee profiles are retained, however there are substantial added benefits of the new LYSAGHT SupaZed® and SupaCee® purlin profiles.The features of the traditional purlins that are the same in the SUPAPURLIN® shapes are:

  • Single web
  • Top & Bottom flange. The Cee profile has equal flanges. The Zed profile has the flanges facing in opposite direction and one flange is "wide" and one is "narrow" to allow lapping.
  • Lip stiffeners at the free end, or extremity, of the flange. These lips point back towards the centre of the profile.

Improved Performance

The efficiency of the SUPAPURLIN profiles delivers significant savings. Performance improvements can be achieved over traditional zed and cee purlin designs, when using LYSAGHT SupaZed® and LYSAGHT SupaCee® Purlins. The result is increased purlin spacing, increased purlin spans (frame or rafter spacing) and fewer rows of bridging.


Notes:

When comparing the capacity of LYSAGHT® purlins with other purlin profiles care needs to be exercised. Comparisons can only be successfully completed when a "like-for-like" comparison is made. Differences can result from a number of reasons such as the selection of design parameters for;

  • Cleat restraints, cladding restraints
  • Bridging location
  • Profile dimensions
  • Lap length

Features

  • Longitudinal web stiffeners (4 off)
  • Lip has an added stiffeners at the free end, or extremity, of the lip. These added stiffeners point back towards the web of the profile
  • No change to the accepted practices of packaging, marking and handling.
  • No change to the accepted traditional practices of installation. The lapping method is unchanged, the cleat fixing is unchanged, the bridging installation is unchanged, the fixing of fly bracing and accessories is unchanged
  • Minimal face-to-face metal contact means minimised staining of surfaces, and no locking of purlins in frozen bundles.
  • Purlin nesting results in no wedging/interlocking of purlins in bundles means ease of separation on site.
  • Rounded lips means added site safety from handling of sharp edges.
  • Rounded corners means added site safety due to ease of sliding of purlins on rafter surfaces, and no damage to surfaces of painted rafters from sliding of purlins during installation.
  • Rigidity of purlin means added safety and less labour requirements during the flipping of purlins during installation onto cleats.
  • Unique patented profile, which cannot be copied. What is specified is what you get. Thus the design strength is not compromised and the material is guaranteed to be Australian
  • Significant improvement in strength performance can be achieved in many purlin sizes and span configurations. Thus there are considerable further economic benefits to be made
  • LYSAGHT® SupaPurlin software available from the University of Sydney, please visit Lysaght website - LYSAGHT® SupaPurlin Software
  • Suitable for use for commercial, industrial and rural buildings, medium and small structures such as sheds and awnings, structural frame of small and medium sized buildings, racking frames, wall framing such as stud and plate/track, floor joists, rafters and beams, posts
Note:
  • Manufactured in NSW, QLD and SA, availability in other states is on an application basis
  • Purlins should be stored off the ground and on a slight slope so that water can drain away
  • Purlins should be stored off the ground and on a slight slope so that water can drain away
  • Direct contact of incompatible material with coating should be avoided. In such applications, suitable paint systems should be obtained from paint manufacturers
  • Consider orientation of Zed and Cee purlins in relation to possible build-up of substances such as dust or grain
  • Special transport requirements are needed for lengths over 12000mm
Website    |    Email    |   
Phone 02 6040 8044

GALVASPAN® steel

Create Specification
LYSAGHT® range of products:
Update
Suppliers Near You
533 Dallinger Road, LAVINGTON, NSW, 2641 Website    |    Email    |   
Phone 02 6040 8044
Shop 2 221 Brisbane Rd, BIGGERA WATERS, QLD, 4216 Website    |    Email    |   
Phone 07 5656 8500
27-29 Redden St, PORTSMITH, QLD, 4870 Website    |    Email    |   
Phone 07 4036 6433